Magnetic separator structure

2017-05-11

 Magnetic separator structure

The magnetic system of the machine, the use of high-quality ferrite material or with rare earth magnet composite made, the average magnetic induction tube count of 100 ~ 600mT. The magnetic separator has the advantages of simple structure, large processing capacity, convenient operation and easy maintenance. Magnetic structure of the magnetic separator: wet permanent magnet magnetic separator mainly by the cylinder, magnetic, tank, transmission part of the four parts. Cylinder from 2-3mm stainless steel coil welded into a tube, the end cap for the cast aluminum pieces, with stainless steel screws and cylinder connected. Motor through the reducer, driven by the cylinder for rotary motion. Magnetic system for the open magnetic system, installed in the cylinder. The magnetic block is mounted on the bottom plate of the yoke with stainless steel bolts. The shaft of the yoke extends out of the barrel and the shaft ends are fixed with the arm. Pull the arm can adjust the magnetic angle, adjust the appropriate can be fixed with a rod. The working area of the tank is made of stainless steel plate, and the other parts of the frame and the tank are welded with ordinary steel.