+86-371-63699132
sales@unique-crusher.com
(Live chat)High-efficiency Concentrator Introduction:
Concentrator is for concentrates and tailings dewatering in processing plant, make the 20-30% pulp increase to 40-70%. This machine is widely used in metallurgical, chemical, coal, non-metallic mineral processing, environmental protection and other industries.
Performance Features of High-efficiency Concentrator
(1) Add flocculants, solid sedimentation particle size increases, thus speeding up sedimentation;
(2) Tilted plate installed, shorten mineral particles settling distance, increasing area of the settlement;
(3) Develop flocculation, filtration, compression of slurry deposition dense state layer, and improve the processing capacity;
(4) Equipped with a complete self-control facilities.
Work Principle of High-efficiency Concentrator
Concentrator mainly consists by two parts, the circular pool and rake scraper. Solid particles suspend in the slurry are settled due to gravity, upper part is clarified water, thus the solid and liquid can be separated. Slurry that deposited on the bottom of the pool is continuously scraped by rake scraper to the discharge port at bottom centered and discharged, and the clarified water overflows along the upper edge of the pool.
Technical Parameters of High-efficiency Concentrator
|
Mode-Spec. |
Pool (m) |
sediment area (m²) |
Raking Part |
Motor |
Capacity (t/d) |
Total Weight (t) |
|||||
|
Model |
Spec. |
Inner dia. |
Depth |
Bottom |
Mode |
Height (m) |
Time for each round (min/r) |
Transmission |
Lift |
||
|
NZS-1 |
Φ1.8m |
1.8 |
1.8 |
2.54 |
Manual |
0.16 |
2 |
Y90L-6 1.1KW |
---- |
5.6 |
1.8 |
|
NZS-3 |
Φ3.6m |
3.6 |
1.8 |
10.2 |
Manual |
0.35 |
2.5 |
Y90L-6 1.1KW |
---- |
22.4 |
4.1 |
|
NZS-6 |
Φ6m |
6 |
3 |
28.3 |
Manual |
0.2 |
3.7 |
Y90S-4 1.1KW |
---- |
62 |
10.2 |
|
NZSF-6 |
Φ6m |
6 |
3 |
28.3 |
Manual |
|
3.7 |
Y90S-4 1.1KW |
---- |
62 |
4.8 |
|
NZ-9 |
Φ9m |
9 |
3 |
63.6 |
Automatic |
0.25 |
4.34 |
Y132S-6 3KW |
XWD0.8-3 0.8KW |
140 |
8.1 |
|
NZS-9 |
Φ9m |
9 |
3 |
63.6 |
Manual |
0.25 |
4.34 |
Y132S-6 3KW |
---- |
140 |
7.1 |
|
NZS-12 |
Φ12m |
12 |
3.5 |
113 |
Manual |
0.25 |
5.28 |
Y132S-6 3KW |
---- |
250 |
10.5 |
|
NZ-15 |
Φ15m |
15 |
4.4 |
176 |
Automatic |
0.4 |
10.4 |
JTC752A-44 5.2KW |
Y112M-6 2.2KW |
350 |
24.7 |
|
NZ-20 |
Φ20m |
20 |
4.4 |
314 |
Automatic |
0.4 |
10.4 |
JTC752A-44 5.2KW |
Y112M-6 2.2KW |
960 |
27.5 |
|
NZ-30 |
Φ30m |
30 |
7.165 |
707 |
---- |
0.61 |
13.7 |
Y100L1-4 2.2×2KW |
YCJ132-S 1.5KW |
---- |
34.8 |
|
NZS-45 |
Φ45m |
45 |
4.636 |
1590 |
Manual |
---- |
20 |
JTC672A-44 5.2KW |
YCJ160-S 2.2KW |
515 |
51.8 |
|
NT-15 |
Φ15m |
15 |
3.5 |
177 |
---- |
---- |
8.4 |
Y132M2-6 5.5KW |
---- |
390 |
12 |
|
NQ-18 |
Φ18m |
18 |
3.5 |
255 |
---- |
---- |
10 |
Y132M2-6 5.5KW |
---- |
560 |
11 |
|
NQ-24 |
Φ24m |
24 |
3.4 |
452 |
---- |
---- |
12.7 |
Y160M-6 7.5KW |
---- |
1000 |
25.3 |
|
NG-30 |
Φ30m |
30 |
3.6 |
707 |
---- |
---- |
16 |
Y160M-6 7.5KW |
---- |
1570 |
29.4 |
|
NJ-38 |
Φ38m |
38 |
4.9 |
1134 |
---- |
---- |
10-25 |
JZT252-4 11KW |
Y160M-6 7.5KW |
1600 |
60.2 |
|
NT-45 |
Φ45m |
45 |
5.05 |
1590 |
Automatic |
---- |
19.3 |
Y160L-6 11KW |
---- |
2400 |
63.6 |
|
NTJ-53 |
Φ53m |
53 |
5.07 |
2202 |
---- |
---- |
23.18 |
Y180L-6 15kw |
---- |
6250 |
84.8 |
|
NT-100 |
Φ100m |
100 |
5.65 |
7846 |
---- |
---- |
43 |
Y180L-6 15KW |
---- |
3030 |
204.6 |